Hybrid Standalone NVR User Guide
Refer to the following for detailed information.
Enable
Check this box to enable email function.
SMTP Server
Input the server address and then enable this function.
Port
Default value is 25.
Anonymous
Enable for servers that support the anonymity function, which allows you to automatically login
anonymously. If enabled, you do not need to input the user name, password or the sender
information.
User Name
The user name of the sender email account.
Password
The password of sender email account.
Sender
Sender email address.
Authentication (Encryption mode)
Select SSL, TLS or NONE.
Subject
Input email subject here.
Attachment
Check the box to send out the email of the snapshot picture.
Receiver
Enter the destination (receiver’s) email address (maximum of three addresses. This supports SSL and
TLS email boxes.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means there is no interval.
The system will not send out the email immediately when the alarm occurs. When the Motion
Detection or the Abnormality event activates the email, the system sends out the email according to
the interval you have specified here. This function is very useful when there are too many emails
activated by the Abnormality events, which may result in heavy load for the email server.
Health Mail Enable
Check the box to enable this function.
NVR32xx-P Series User Guide
160
