Hybrid Standalone NVR User Guide
Status
When UPNP is offline, this field displays “Unknown”. When UPNP is online, it shows “Success”.
Router LAN IP
This is the router IP in the LAN.
WAN IP
This is the router IP in the WAN.
Port Mapping List
This represents the one-to-one relationship with the router’s port mapping setting.
Enable
If checked, this indicates that port mapping is enabled for this port.
List
Displays the following items:
•
Service Name.
Defined by user
•
Protocol.
Protocol type
•
Internal Port
. Port that has been mapped in the router
•
External Port.
Port that has been mapped locally
Default
Click to restore the UPNP default port setting of the HTTP, TCP and UDP.
Add to the List
Click to add the mapping relationship.
Delete
Click to remove one mapping item.
Double-click an item to change the corresponding mapping information. See Figure 3-51.
IMPORTANT:
When you are setting the router external port, use1024-5000. Do not use ports 1-
255 and system ports 256-1023 to avoid conflict. For the TCP and UDP, make sure
the internal port and external port are the same to ensure the proper data
transmission.
Figure 3-51
NVR32xx-P Series User Guide
73
