Hybrid Standalone NVR User Guide
Figure 4-44
Note:
•
Set the Motion Detect record period.
•
Navigate to
Storage > Schedule
to set the current channel as a scheduled recording.
Anti-dither
This feature sets a delay period before triggering the next Motion Detection event, to avoid re-
triggering on the same event. The delay period begins when the current motion detection event has
ended. The system only stores one event during the anti-dither period. The value ranges from 5s to
600s.
Sensitivity
There are six levels. The sixth level has the highest sensitivity.
Region
Click the
Setup
button to set Motion Detection zone. There are 396(PAL)/330(NTSC) small zones.
The red zone is the motion detection zone; the clear zone is the disarmed zone. The system can only
detect motion detect signal from the armed region.
To set the Motion Detection Region:
1.
Click the
Setup
button. A single screen display appears with a grid and semi-transparent
overlay.
The red zone is the armed (motion detection) zone; the clear zone is the disarmed zone.
The system only detects motion in the red armed region. The default setup is the entire
screen (all red).
2.
Drag the mouse to set the motion detection zone. The selected area no longer shows the
overlay.
3.
Click
Save
.
NVR32xx-P Series User Guide
171
