ADT 7900 Uno Dicing Series, Site Preparation And Installation Supplement, Page: 8 / 46

Site Preparation and Installation Supplement
Table of Contents
Advanced Dicing Technologies Ltd
.
vi
TABLE OF CONTENTS
1. Installing the System _________________________ 1
2. Specifying System Elements __________________ 2
2.1 Workpieces _______________________________________________ 2
2.2 Blades ____________________________________________________ 2
2.3 Broken Blade Detector (Optional) _____________________________ 2
2.4 Spindle ___________________________________________________ 3
2.5 X-Axis (Feed) ______________________________________________ 3
2.6 Y Axis (Indexing) ___________________________________________ 3
2.7 Z Axis (Cut Depth) __________________________________________ 4
2.8 Theta-Axis (Rotational) ______________________________________ 4
2.9 Vision System _____________________________________________ 4
2.10 Display ___________________________________________________ 4
3. Preparing the Site ___________________________ 5
3.1 Environmental Requirements _________________________________ 5
3.2 Electricity Supply __________________________________________ 5
3.2.1 Electric Supply Specification ___________________________________ 5
3.3 Water ____________________________________________________ 6
3.3.1 Water Composition Requirements (Maximum Values) _______________ 6
3.3.2 Cutting Water Supply (De-ionized Water) _________________________ 6
3.3.3 Spindle Cooling Water Supply __________________________________ 7
3.4 Drain and Exhaust __________________________________________ 7
3.4.1 Water Drain ________________________________________________ 7
3.4.2 Mist Exhaust _______________________________________________ 8
3.5 Pneumatics _______________________________________________ 8
3.6 Site Dimensions____________________________________________ 8
3.6.1 System Dimensions __________________________________________ 9
3.6.2 Center of Gravity ____________________________________________ 9
3.6.3 Installation Site _____________________________________________ 9
4. Performing System Installation _______________ 10
4.1 Receiving the System ______________________________________ 11
4.2 Initial Inspection __________________________________________ 11
4.3 Unpacking the System _____________________________________ 12
4.3.1 Uncrating the System _______________________________________ 13
4.3.2 Releasing All Moveable Parts and Unsealing the System ____________ 15