Getting Started
43
3.8 RTM Installation
The installation and removal procedures for a RTM are the same
as those for CompactPCI boards. Because they are shorter than
front boards, pay careful attention when inserting or removing
RTMs.
Refer to previous sections for peripheral connectivity of all I/O
ports on the RTM. When installing the cPCI-3840 series and
related RTMs, make sure the RTM is the correct matching model.
Note
:
Use the correct RTM to enable functions (I/O interfaces) on
rear side. The RTM or system board can be damaged if the
incorrect RTM is used.
Some I/O ports are supported on both the front board and the
RTM, including Keyboard, Mouse, VGA and USB. These I/O ports
can be connected either via the front or rear modules but DO NOT
access these ports on both front and rear simultaneously.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
