OPERATING AND USER MANUAL Q-12 CoaXPress series
________________________________________________________________________________________________________________
_________________________________________________________________________________________
Adimec
27
7.5.3 Height
| RW | B |
32 to 3072
Increment: 4
Set the height of the image in pixels.
ISSUE 2 NOTE:
When binning is enabled, the maximum range and increment have to be divided by two.
ISSUE 2 NOTE:
This feature is automatically updated if any of the following features is changed:
BandAdd, BandClearAll, BandEnable, BandRemove, BandLoad, BandSelector, BinningVertical
7.5.4 OffsetX
| RW | B |
ISSUE 1
0 to max 4064,
Increment: 16
Set the horizontal offset from the origin to the region
of interest in pixels. OffsetX is limited by the output
width programmed.
ISSUE 2
0 to max 4064,
Increment: 8
Set the horizontal offset from the origin to the region
of interest in pixels. OffsetX is limited by the output
width programmed.
ISSUE 2 NOTE:
When binning is enabled, the maximum range and increment have to be divided by two.
ISSUE 2 NOTE:
This feature is automatically updated if any of the following features is changed:
BinningHorizontal
7.5.5 OffsetY
| RW | B |
0 to max 3068
Increment: 4
Set the horizontal offset from the origin to the region of interest in pixels. OffsetY is
limited by the output height programmed.
ISSUE 2 NOTE:
When binning is enabled, the maximum range and increment have to be divided by two.
ISSUE 2 NOTE:
This feature is automatically updated if any of the following features is changed:
BinningVertical
7.5.6 Binning
ISSUE 2 ONLY
In section 7.5.7 to 7.5.9 the camera features related to binning are described. This section gives some
general remarks about the use of the binning function.
The binning functionality cannot be used in combination with the low frequency flat field correction.
The binning functionality is not available in color cameras.
There are three binning situations possible. Two are performed by the digital processing in the FPGA
while one is done on sensor level. The situations are summarized in the below table.
BinningHorizontal
BinningVertical
Type
2
1
FPGA
1
2
FPGA
2
2
Sensor
