Adimec 188160 Page 41 Operating And Users Manual Download

Page: 41 / 70

OPERATING AND USER MANUAL Q-12 CoaXPress series

________________________________________________________________________________________________________________

_________________________________________________________________________________________

Adimec

7.9 Analog control

Analog control functions like gain and white balance can be found in this group.

7.9.1 GainSelector

| RW | B |

All

Gain features will influence all pixels.

Red (Color Only)

Gain features will only influence the red pixels.

Green (Color Only)

Gain features will only influence the green pixels.

Blue (Color Only)

Gain features will only influence the blue pixels.

NOTE:

Gain is applied before BlackLevel.

7.9.2 Gain

| RW | B |

GainSelector value

Gain range

All

1 to 8 (Color Only) 1 to 32 (Monochrome Only) Increment: 0.001.

Red

1 to 4 (Color Only) Increment: 0.001.

Green

1 to 4 (Color Only) Increment: 0.001.

Blue

1 to 4 (Color Only) Increment: 0.001.

NOTE:

This gain is a digital gain. For analog gain use the ProgrammableGainAmplifier.

This feature is automatically updated if any of the following features is changed:
GainRaw, GainSelector, WhiteBalanceCalibrate

7.9.3 GainRaw

| RW | B |

GainSelector value

Gain range

All

1000 to 8000 (Color Only) 1000 to 32000 (Monochrome Only) Increment: 1.

Red

1000 to 4000 (Color Only) Increment: 1.

Green

1000 to 4000 (Color Only) Increment: 1.

Blue

1000 to 4000 (Color Only) Increment: 1.

NOTE:

This gain is a digital gain. For analog gain use the ProgrammableGainAmplifier.

This feature is automatically updated if any of the following features is changed:
Gain, GainSelector, WhiteBalanceCalibrate

Summary of Contents for 188160







































































Search results

Summary of Contents for 188160

Reviews:

Related manuals for 188160

Brands by name

Popular brands

Adimec 188160, Operating And Users Manual

Search results

Summary of Contents for 188160

Reviews:

Related manuals for 188160

Brands by name

Popular brands