OPERATING AND USER MANUAL Q-12 CoaXPress series
________________________________________________________________________________________________________________
_________________________________________________________________________________________
Adimec
46
This feature is automatically updated if any of the following features is changed:
LUTStart, LUTEnd
7.12.8 GammaFactor
| RW | E |
ISSUE 2 ONLY
0.01 to 10
Increment: 0.01
Set the Gamma factor.
7.12.9 GammaFactorRaw
| RW | E |
ISSUE 2 ONLY
1 to 1000
Increment: 1
Set the Gamma factor.
7.13 Transport Layer Control
7.13.1 PayloadSize
| RO | E |
Integer
Provides the number of bytes transferred for each image or chunk on the
stream channel.
This feature is automatically updated if any of the following features is changed:
Width, Height, PixelFormat
7.14 Defect pixel
A defect pixel correction is available that replaces a defect pixel by a horizontally interpolated value or a
vertically interpolated value or a horizontal nearest neighbor value depending on the local defect distribution.
The correction method is illustrated in Figure 7-12. For a color camera the same method applies but with the
difference that in this situation only pixels of the same color plane are regarded.
A factory list with defect pixels is stored in each camera. Additional defect pixels can be added to the list by the
user. Up to 1000 unique defect pixel coordinates can be stored in non volatile memory.
Figure 7-12: Defect pixel correction method. Per tile, the center pixel correction method is indicated. In Mask,
pixels marked by 1 are defect, pixels marked by 0 are not defect and irrelevant pixels are indicated by x. In the
correction tile the weight factor per pixel is indicated.
