Adimec 188160 Operating And Users Manual Download

Page: 65 / 70

OPERATING AND USER MANUAL Q-12 CoaXPress series

________________________________________________________________________________________________________________

_________________________________________________________________________________________

Adimec

7.19.15

BandStatus |

BandStatusNoError

No error occurred in programming the bands.

BandStatusOutsideAvailableHeight

The band cannot be created as it is outside the available height.

BandStatusOverlap

The band overlaps with an already existing band.

BandStatusCouldNotAdd

The band could not be added to the band list.

BandStatusCouldNotRemove

The band could not be removed from the band list.

BandStatusRestoreError

The user band list could not be loaded from non-volatile
memory.

This feature is automatically updated if any of the following features is changed:
BandAdd, BandClearAll, BandRemove, BandLoad, BandSave, BandSelector

Summary of Contents for 188160







































































Search results

Summary of Contents for 188160

Reviews:

Related manuals for 188160

Brands by name

Popular brands

Adimec 188160, Operating And Users Manual

Search results

Summary of Contents for 188160

Reviews:

Related manuals for 188160

Brands by name

Popular brands