Side A Serial Transaction Mode
: ese radio buttons allow the user to enable or disable Serial
Transaction Mode for Side A. When enabled the Router will send out 852 configuration updates
serially in a round robin fashion to the other 852 devices on the channel instead of in parallel.
is means that an update transaction has to complete or time-out with one device before a new
transaction is started with the next device. is mode significantly reduces bursts of traffic when
devices are added to a channel or their routing data is changed. is may be helpful for low
bandwidth 852 channels. Select the new value and click the
Submit Changes
button.
Side A Serial Transaction Interval
: is field sets the time interval between successive
configuration transactions when Serial Transaction Mode is enabled for Side A. e default is
1000 ms. is enables the user throttle the rate at which configuration updates are sent out on the
channel and thereby manage traffic. is may be helpful for low bandwidth 852 channels. Enter
the new value and click the
Submit Changes
button.
Side A ConfigServer IP Port
: is field appears when the router is in 852 bridge mode and Side A
is in Normal mode. It allows the user to set or change the Side A unicast IP port of the config
server for the Side A 852 channel. To change the port, type in the new port number (0-65535),
and click the
Submit Changes
button.
Side B Mode
: ese radio buttons determine the operational mode for Side B, either Manual or
Normal. To change select the appropriate radio button and click the Submit Changes button.
Side B Data IP Port
: is field appears when the router is in 852 bridge mode. It allows the user
to set or change the Side B unicast IP port of the router. To change the port, type in the new port
number (0-65535), and click the
Submit Changes
button.
Side B ConfigServer IP Address
: is field appears only when the router is operating in 852 Bridge
mode and Side B is in Normal Mode. is is the unicast IP host address of the configuration
server for the Side B 852 channel. To change the value in the field, type in the new value in the
dotted format
XX.XX.XX.XX
and click the
Submit Changes
button.
Side B ConfigServer IP Port
: is field appears when the router is in 852 bridge mode and Side B
is in Normal mode. It allows the user to set or change the Side B unicast IP port of the config
server for the Side B 852 channel. To change the port, type in the new port number (0-65535),
and click the
Submit Changes
button.
Side B Serial Transaction Mode
: ese radio buttons allow the user to enable or disable Serial
Transaction Mode for Side B. When enabled the Router will send out 852 configuration updates
serially in a round robin fashion to the other 852 devices on the channel instead of in parallel.
is means that an update transaction has to complete or time-out with one device before a new
transaction is started with the next device. is mode significantly reduces bursts of traffic when
devices are added to a channel or their routing data is changed. is may be helpful for low
bandwidth 852 channels. Select the new value and click the
Submit Changes
button.
Side B Serial Transaction Interval
: is field sets the time interval between successive
configuration transactions when Serial Transaction Mode is enabled for Side B. e default is
1000 ms. is enables the user throttle the rate at which configuration updates are sent out on the
channel and thereby manage traffic. is may be helpful for low bandwidth 852 channels. Enter
the new value and click the
Submit Changes
button.
-55-
Summary of Contents for GRouter4
