Cat5 CrossOver Cable
Fig.2.2: Ethernet with direct connect crossover cable
2
.
1.2. WiFi (802.11b)
For WiFi equipped GRouter devices, an 802.11b WiFi access point or ad hoc connection must be
setup between the web browser host computer and the GRouter device. First configure the host
computer to add an IP interface on subnet 10.0.2.0/255. Instructions for setting up Windows XP
are in the next section. en setup the WiFi configuration. e default WiFi configuration for the
GRouter device is as follows:
Wireless SSID: "Adept"
Wireless Mode: Any Type (Ad hoc or Infrastructure)
Channel: Search
Encryption: None
e access point or ad hoc connection must be set up to allow a connection on a network with
SSID of
Adept
or
Any
. ere are many different topologies that may be employed for connecting
to the GRouter (GRouter) WiFi version. e following figures show some of the more common
ones.
Ethernet
Fig.2.3: WiFi setup with access point and Ethernet connection to host computer
-18-
Summary of Contents for GRouter4
