2.13. DDNS Setup Page
e
DDNS Setup Page
allows the configuration of DDNS capability. is page only appears when
in manual mode. Following is a brief description of each item listed on the page.
Fig.2.25: Dynamic DNS Configuration Page
DDNS Name
: e is the domain name for the associated NAT router that includes DDNS
support. e DDNS name is hosted by
dyndns.com
.
DDNS IP Address
: is is the current WAN address of the NAT router.
DDNS State
: ese two radio buttons are used to enable or disable DDNS support. For DDNS to
work,
DDNS State
must be
On
and the device must be in manual mode and NAT support must
also be enabled.
DDNS Refresh time
: is field is used to set how many seconds expire before a node does a DNS
lookup of the DDNS name in order to see if its DDNS IP address has changed. If so it updates the
other nodes with its new IP address.
1st DNS Address
: is is the IP address of a DNS server. e GRouter device performs DNS
address lookups on of the
DDNS Name
with this server.
2nd DNS Address
: is is the IP address of a DNS server. e GRouter device performs DNS
address lookups on of the
DDNS Name
with this server if the first server is not available.
3rd DNS Address
: is is the IP address of a DNS server. e GRouter device performs DNS
address lookups on of the
DDNS Name
with this server if the first and second servers are not
available.
Look Up DDNS IP Address
: is button forces an immediate DNS address lookup of the devices
DDNS Name
.
Submit Changes
: is button updates the configuration memory of the device and refreshes the
web page to reflect any changes.
-51-
Summary of Contents for GRouter4
