adept technology GRouter4, User Manual

Page: 33 / 87

Clear Router Config : is button clears all router configuration information, such as routing
tables, back to factory defaults. It does not affect the web or IP address or interface. is is useful
when moving the router to a different 852 channel or configuration and a known starting
configuration is desirable.
Prepare to Power Down : is button checks the status of any pending flash writes and displays a
corresponding web page. If there are no pending flash writes the displayed web page will indicate
that it is safe to power down. Otherwise it will display a web page with a timer indicating one
should wait until the timer expires before powering down to allow the writes to complete. Once
the timer expires a dialog box will display indicating that time is up. is allows one to do
something else while flash is writing. e link on the page takes one back to the router setup. If
the IP address was changed, the link goes to the new IP address.
Fig.2.11: Safe to Power Down Page
Fig.2.12: Unsafe to Power Down Page
Fig.2.13: Time's Up
Reboot : is button performs a so reboot of the main processor on the router. is is needed
anytime any of the parameters marked with a green asterisk change. e reboot button will also
check for any pending flash writes and the reboot will be delayed until the flash writes have
completing. When rebooting the following page will be displayed. e page includes a timer with
an estimate of when the reboot will be completed, this includes the time to complete flash writes
if any. Once the timer expires a dialog will display indicating that the time is up. See above. e
link to Gateway will return to the status page of the device at its latest IP address.
-33-