port 80 may be in use by another device. e device must be restarted before changes to the web-
server port will be activated. To change the value, type in the new value and click the
Submit
Changes
button and then click the
Reboot
button. A typical alternate web server port is 8080. To
access the web server on any port other than 80, use the following format in the web browser:
http://IP Address:Port
for example
http://10.0.2.40:8080
Reboot
: is button performs a so reboot of the main processor on the router. is is needed for
any of the changes on this page to take effect. When rebooting the Rebooting page will be
displayed (see previous section).
-36-
Summary of Contents for GRouter4
