2.9. 709 Setup Page
e 709 Setup Page is used to set up the 709.1 protocol specific properties of the router. is
information includes the subnet address, node address, domain address, node ID and node state
numbers for both sides of the router and the twin mode monitoring application (when enabled)
as well as the subnet and group forwarding tables. Following is a brief description of each item
listed on the page, as well as instructions on how to set or change items. e Page has three views,
one for Side A (IP), the second for Side B (FTT-10, and the third for the twin mode application
(when enabled). In Bridging Router mode both Side A and Side B are IP. e main top section of
the page looks like the following.
Fig.2.16: 709 Side B Setup Page Main Section
Fig.2.17: 709 Side B Setup Page Main Section
2
.
9.1. Node Parameters
e management of these parameters is usually performed by a management tool such as
Echelon's LonMaker®. If you are using a management tool, it is recommended that these
-39-
Summary of Contents for GRouter4
