Fig.2.22: Channel List Page in Manual Mode
Channel Address Mode
: Is either
Unicast
or
Multicast
.
Multicast
is only supported in manual
mode. Select the desired mode from the popup menu and click
Submit Change
s.
Multicast IP Addr
: is is the multicast IP address of the router. is is used when the channel in
in
Multicast
mode. Multicast addresses are in the range 224.0.0.0 to 239.255.255.255. Addresses
ending in ".0 " are reserved. Some addresses ending in ".1" are used for multicast host broadcasts
and should also be avoided. Examples of valid multicast addresses include: 225.0.0.2, 225.0.0.3,
225.1.2.3. You may need to check with your network administrator to see what multicast
addresses are available for your use. Enter the desired value and click
Submit Change
s. e device
will have to be rebooted for any Multi-cast addresses changes to take effect. All devices with same
multi-cast address will communicate on port 1628.
-46-
Summary of Contents for GRouter4
