1-1
S E C T I O N 1
General Description
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
Application and Description
♦
Control Panels Supported
♦
Differences between the 4285 and 4286 VIP Module
♦
4286 VIP Module Specifications
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Application and Description
The Ademco 4286 Vista Interactive Phone (VIP) Module is an add-on acces-
sory that can be used with certain Ademco controls* to provide an interactive
phone capability to the security system. This feature will permit access to the
security system via any Touch-tone phone (either on premises or by a call-in
when away from the premises).
Only one 4286 VIP Module can be used in a system.
1.
The 4286 VIP Module can only be used with systems using address-
able keypads. Addressable keypads that may be used are: 4137AD,
5137AD, 6128, 6137, 6138, and 6139.
2.
For controls that do not support addressable keypads (such as the
VISTA-10(SE), VISTA-20 (all models), and VIA-30P(SE), an address-
able keypad must still be used and set to the non-addressable mode.
The non-addressable mode, for units with DIP switches all toggled to
the UP position, is address 31.
•
See the control's Installation Instructions for information on
whether the control can support a VIP Module
All controls that support a 4285 Voice Module can support the 4286 VIP Module
as well. Existing 4285 Voice Module programming and downloading fields for the
control panel still apply.
