15
3.1.6 Current/voltage measure
1. Selected Current or Voltage in MEASURE mode.
◆
Do NOT apply voltage / current that exceeds the current / voltage range.
◆
Press to zero.
◆
If the value falls outside the current/voltage range, the color of the display value will change from black to red and the
calibrator will issue the alarm.
◆
If the value exceeds the measure limit of the calibrator, the value will be shown as “_ _ _ _ _ _ _ _” and the
calibrator will issue the alarm.
2. Connection: complete the electrical connection as shown in Figure 3-8 or Figure 3-9.
1. Select Switch in MEASURE mode.
2. Connection: Complete the electrical connection as shown in Figure 3-10.
Figure 3-8 Current measure
Figure 3-9 Voltage measure
Figure 3-10 Switch test
