69
Select the calibration point which needs to be changed, then input value
◆
3 points for current output calibration
◆
Default current output calibration points are 1mA, 10mA, 20mA
◆
Additel does not recommend changing calibration points.
3. Calibration Execution:
1). Press
to start calibration process
2). Output current from 760 calibrator to standard
3). When standard measuring value is stable, press correspondent
Measured Value
and input
measuring value displayed on
the standard then select Enter button or
to confirm and then
press
to record data and move to the next calibration point.
5.5.1.3 Internal Pressure Module Calibration
1. Output Connection:
Select Internal / External pressurizing;
◆
For Internal pressurizing: Please connect 760 calibrator pressure outlet port
to the standard
ensuring the standard is in measurement mode
◆
For External pressurizing: Please connect 760 calibrator pressure outlet port
with the standard,
ensuring the standard is in pressure generation mode
2. Calibration point setup:
Select the calibration point which needs to be changed, then input value
◆
3 points for internal pressure module calibration
◆
Default calibration points are the lower limit, zero point, and the upper limit of internal pressure
www.
.com
1.800.561.8187
Summary of Contents for ADT760
