7352 Series Digital Multimeter Operation Manual
6.6.4 SCPI Command Reference
6-33
Measurement Measurement
function
:CONFigure:<function>
[{<real>|MAXimum|MINimum}]
[,(@<ch>)] *1
Switches to the specified measurement function.
<real>: Range setting (0
Setting value
Maximum value
for the measurement range)
(For the frequency measurement, the maximum value is
750 V.)
This setting is not allowed for the continuity, diode, and
temperature measurements.
:CONFigure? [(@<ch>)]
Reply: "Function
d.dddddE
dd"
"
d.dddddE
dd" shows a measurement range.
Invalid function :INHibit:FUNCtion:<function>
{ON,1|OFF,0}
Sets the invalid function.
:INHibit:FUNCtion:<function>?
Reads a status in which the invalid function is set.
Reply: 1 or 0 (1: Invalid, 0: Valid)
Trigger
*TRG
Trigger command
Measurement
operation
:MEASure?
Sets the DCV measurement function and reads the mea-
sured data.
Reply:
dddd.ddE
dd
For more information, refer to 6.6.3 RS232 Output data
format
:MEASure:<function>? *1
Performs the measurement operation once and reads the
measured value.
For more information, refer to 6.6.3 RS232 Output data
format.
:READ?
Initializes the trigger system and reads the measured data.
For more information, refer to 6.6.3 RS232 Output data
format.
:FETCh?
Only reads the measured data.
Reply:
dddd.ddE
dd
For more information, refer to 6.6.3 RS232 Output data
format
.
Measurement
data memory
store ON/OFF
:TRACe:STATe {ON,1|OFF,0}
ON, 1: ON
OFF, 0: OFF
:TRACe:STATe?
Reply: 1 or 0
Measurement
data memory
reading
:TRACe:NUMBer
{<real>|MAXimum|MINimum},
{<real>|MAXimum|MINimum}
[,(@<ch>)]
Sets the recall data range.
<real>:0 to 19999
:TRACe:DATA? [(@<ch>)]
Reads the stored data. (xxx shows a function.)
xxx_
d.dddddE
dd,...
:TRACe:DATA:NUMBer?
[(@<ch>)]
Reads the stored data range.
Reply: ddddd,ddddd
0, -1
:TRACe:DATA:POINts? [(@<ch>)] Reads the stored data count.
Reply: ddddd
0
Measurement
memory initial-
ization
:TRACe:CLEar
*1: <function>: Specify a function of “measurement function”, but do not enclose in double quotes.
Item
SCPI command
Description
Initial
value
