6243/44 DC Voltage Current Source/Monitor Operation Manual
3.3.7 MENU key (Setting Parameters)
3-15
3.3.7.8
RANDOM MEMORY (Random Memory Settings)
Selecting
RANDOM MEMORY
and pressing the key enables selection of parameters related to the ran-
dom memory.
Memory Program
Enables data settings of the memory (random memory) for ran-
dom sweep source data.
Change the digit at the position of the cursor (flashing) by rotating
the Data knob to specify the desired memory address. Enter the
data enclosed in [ ] using the numeric keys and the unit key.
RND Memory Save
Enables saving of the data set in the random memory to the non-
volatile memory. The saved data is loaded when the power is
turned ON.
RND Memory Clear
Enables clearing of the data set in the random memory.
3.3.7.9
MEASURE BUFFER (Measurement Buffer Memory)
Selecting
MEASURE BUFFER
and pressing the key enables selection of parameters related to the
measurement buffer memory.
Memory Store
Selects storing of the measured data to the memory.
For details on the memory storing operations, refer to Section
4.13, “Measurement Data Storing Function.”
Normal-ON: Memory store operation takes place in the normal
mode.
At this time, the SLOT indicator is ON.
Burst-ON:
Memory store operation takes place in the burst
mode.
Used for high-speed measurement.
At this time, the SLOT indicator is ON.
OFF:
Memory store operation is released.
At this time, the SLOT indicator is OFF.
Memory Clear
Enables clearing of the measurement buffer memory.
