6243/44 DC Voltage Current Source/Monitor Operation Manual
2.3.2 Battery Charge Test and Discharge Test
2-41
Press the key and select the
Upper Data
parameter by rotating the Data knob.
Press the key and press the
1, ., 5, V,
and
ENTER
keys.
Upper Data is set to +1.50000 V.
Press the key and select the
Lower Data
parameter by rotating the Data knob.
Press the key and press the
1, V,
and
ENTER
keys.
Lower Data is set to +1.00000 V.
Press the key twice or press the
MENU
key, and select
EXT.SIGNAL
in the
parameter group by rotating the Data knob.
Press the key and select the
Operate Signal
parameter by rotating the Data
knob.
Press the key and select
Operate OFF In
by rotating the Data knob.
Operate Signal is set to Operate OFF In.
Press the key and select the
Complete/Busy
parameter by rotating the Data
knob.
Press the key and select
Complete Out LO
by rotating the Data knob.
Complete/Busy is set to Complete Out LO.
Press the key twice or press the
MENU
key, and select
MEASURE BUFFER
in the parameter group by rotating the Data knob.
Press the key and select the
Memory Store
parameter by rotating the Data
knob.
Press the key and select
Normal-ON
by rotating the Data knob.
Memory Store is set to Normal-ON.
Press the key and select the
Memory Clear
parameter by rotating the Data
knob.
Press the key and press the
DIRECT
key.
Memory Clear is executed.
19. Press the
EXIT
key. The measurement screen returns.
20. Press the
DIRECT, +/-, 2, 0, 0, 0, mA,
and
ENTER
keys.
The source current is set to -2 A.
21. Press the
LIMIT, DIRECT, 1, ., 5, V,
and
ENTER
keys.
The voltage limiter is set to 1.5 V.
NOTE:
The following values are for reference only. Actual measurement values will
be different from the values used here due to 6243/44 internal errors and
device characteristics.
AZERO
VM
IS:-2000.0mA L: 1.5000V *PLS
