6243/44 DC Voltage Current Source/Monitor Operation Manual
2.1.1 Front Panel Summary
2-3
3. START and TRIGGER section
START/TRIGGER
key:
Triggers the measurement and pulse source when the sampling is in
the hold state in the DC and Pulse Source mode.
Starts, pauses or restarts the sweep in the sweep source mode.
STOP
key:
Stops the sweep.
RUN/HOLD
key:
Selects free run/hold of measurement and pulse source in the DC,
pulse source mode.
4. ENTRY section
MENU
key:
Displays the parameter group selection screen.
EXIT
key:
Exits the menu screen and returns to the normal screen for measure-
ment.
(
Down
),
(
Up
) keys:
Changes the layers in the menu screen.
(
Left
),
(
Right
) keys:
Moves the cursor (flashing).
Data knob:
Changes the values indicated by the cursor and selects parameters.
DIRECT/ENTER
key:
Moves to the key value setting mode and enters values.
5. GPIB section
GP-IB LOCAL
key:
Cancel GPIB from remote control (when
RMT
is lit).
6.
4 WIRE
lamp:
Lights in the remote sense (4-wire connection) status.
7. OPERATE section
OPERATE
key:
Selects between the Operate (output: ON) and Standby (output:
OFF).
8. Output terminal section
OUTPUT
terminals (
HI
,
LO
): Output terminals for voltage and current
SENSE
terminals (
HI
,
LO
):
Output terminals for voltage output sense in the Remote Sense mode
(4-wire connection) and input terminals for current measurement
DRIVING GUARD
terminal (
6243
only):
Output terminal for driving guard (method to guard the HI side con-
nection at the same potential as that of the HI SENSE terminal)
9.
POWER
switch:
Turns the power ON/OFF.
WARNING:
The 6243
When the output is set to OPERATE, hazardous voltage is output depending on the setting.
Be careful of electric shocks.
!
WARNING:
A hazardous voltage is output if conditions such as the following occur: the instrument is
damaged, an external hazardous voltage is applied, or relevant setting conditions occur.
Be careful of electric shocks.
WARNING:
A hazardous voltage is output if an external hazardous voltage is applied to the case, causing
a potential difference between the case and the LO.
!
