6243/44 DC Voltage Current Source/Monitor Operation Manual
2.2 Basic Operations
2-10
2.2
Basic Operations
This section explains how to set the source and limiter values, how to operate the menus and how to use the
basic measurement functions.
2.2.1
Setting the Source and Limiter Values
(1) Setting numeric values using the cursor and Data knob
The source and limiter values can be set by rotating the Data knob to change the numeric value at the
(flashing) cursor position.
Example.
Setting the numeric value
1. Press the key.
The cursor moves to the left.
2. Rotate the Data knob clockwise.
The figure indicated at the cursor position increases by 1.
3. Rotate the Data knob counterclockwise.
The figure indicated at the cursor position decreases by 1.
4. Press the key.
The cursor moves to the right.
VS:+1.0000V
Cursor (flashing)
VS:+1.0000V
Cursor (flashing)
VS:+1.0010V
Cursor (flashing)
VS:+1.0000V
Cursor (flashing)
VS:+1.0000V
Cursor (flashing)
