ADB Stagelight EURODIM Twin Tech, Installation Manual

Page: 18 / 71

EURODIM TWIN TECH
User Manual - page 16
Issue 2.1 www.adbstagelight.com
The weight and dimensions of the cabinets are included in Chapter “Characteristics”. Prior
to positioning each cabinet, ensure that the floor is flat and horizontal to ensure a good
weight distribution.
It is the responsibility of the system integrator or installer to check if the cabinet weight
load can be supported by the building structure!
After you have positioned the cabinets:
-
Do not remove the plastic, so as to keep a protection during the cabling works.
-
Cut the plastic to have an access to the cabling areas.
-
Remove the doors of the contractor's areas by simply opening the door hinges.
CAUTION! The doors are grounded / earthed.
Gently remove this grounding connection
WHICH MUST BE RESTORED
when the door is eventually put back in place.
During the cabling works, leave the doors in a clean
area and covered with a protection.