Adast Systems AdBlue V-line 47 Series, User Manual

Page: 5 / 46

USER’S MANUAL V-line AdBlue
®
47xx.xxx
1
1. IMPORTANT NOTICE
This document is user guide, how to provide installation, operation and maintenance and service of AdBlue
®
dispenser.
Stated information in this manual is strictly recomended and producer can not response for damages
caused by non keeping rules described in this guide.
ATTENTION!
AdBlue
®
dispenser V-line 47xx.xxx AdBlue
®
designed for filling stations is determined only for
delivery of reduction medium AUS 32 ISO 2224.
It is not allowed to use such
AdBlue
®
dispenser for delivery of flammable fluids !
ATTENTION!
AdBlue
®
is solution of pure urea and desalted clear water with 32,5 % content of urea.
Solution is used as reducing agent for lowering of nitrogen emissions NO
x
in diesel powered engines –
in special SCR catalysator (SCR – „selective catalytic reduction“).
AdBlue
®
is highly corrosive !
AdBlue
®
begins to crystalize at a temperature – 11
o
C!
To guarantee proper function of SCR catalysator in motor vehicle is necesarry to provide regullar
check of solution quality AdBlue
®
as per norm ISO 22241!
Quality, chemical consistence and physical characteristic of solution AdBlue
®
must be in accordance
with norm ISO 22241-1!
International marking of reducing agent AdBlue
®
:
AUS 32 ISO 22241
Therefore before puting AdBlue
®
dispenser into operation must be checked clean surface of storage
tank(s), entering pipeline(s) and purity of dispensed medium - AdBlue
®
. Further must be provided
revision of power wiring and check of electric connections, to prevent electric shock.
Every AdBlue
®
dispenser is tested in production plant for funtionality, safety and metrology. Every delivery
contains user´s manual , ES declaration of conformity and service book with units identification of the
AdBlue
®
dispenser. AdBlue
®
dispenser is designed and produced carefully to provide long term safety
work.During installation and operation must be kept basic safety rules to prevent device user from
potential injuries.
It is not allowed to provide any hardware changes without written permit of the manufacturer.

Important instructions for installation and operation:
a) Please study carefully the user´s manuall and other documentation efore manipulation with the AdBlue
®
dispenser.
b) Please study the delivery content and if you find any discrepancy inform the supplier imediatelly.
c) In time period before installation the AdBlue
®
dispenser provide storage inside dry protected space.
The AdBlue
®
dispenser can not be stored in place with temperature bellow zero(freezing space).
d) Before the installation check completnes of technology as per valid project and check the delivery
pipelines including the connecting fittings.
e) Provide the flushing of technological unit (pipeline systems) by filter unit AdBlue
®
. Keep flushing
untill filter unit will apear clean.
ATTENTION!
FOR CLEANING OF PIPELINE SYSTÉM MAY NOT BE USED PETROLEUM PRODUCTS OR ANY OTHER
CHEMICALS ABLE TO CONTAMINE DELIVERED MEDIUM
AdBlue
®
!
f) Provide electric connection of AdBlue
®
dispenser and revision.
g) Strictly follow the manual.
h) By complete of these conditions can be unit set to operation mode.