USER’S MANUAL V-line AdBlue
®
47xx.xxx
20
the season of the year)
washing the dispenser with surfactant and restoration of preservative coating is also recommended
after more extensive surface staining by fuels
Recommended time interval for the maintenance of stainless body parts:
ATTENTION!
DO NOT WASH STAINLESS STEEL SHEETS
BY WATER OR EVEN SURFACTANT!!
Recommended procedure for stainless steel sheets:
Washing of parts by thorough cleaning of salt residues, dust and
grease followed by the renewal of protective coating on body
parts - by special agent for the protection of stainless steel
sheet - once a month.
Recommended special agents:
-
NEOBLANK spray (producer: Chemische Fabrik Dr. Weight
GmbH & Co. KG, Mühlenhagen 85 - D - Hamburg
-
ANTOX Surface Care 800 S (producer: Chemetall AG,
Silostrasse 7, CH - 5606, Dintikon
-
ULTRAPUR – d ( producer: MMM – Group, SRN)
12.
SUMMARY OF BASIC PRINCIPLES FOR DISPENSER MAINTENANCE
ATTENTION!
Prior to all maintenance activities relevant to mechanical, hydraulic or electric parts it is always
necessary to switch el. current off and carry out reliable provision to prevent its incidental
switching on.
Service manipulation is performed in accordance with operating regulations for the filling station.
-
replace the filter sleeve of the AdBlue
®
filter in compliance with the mode of operation and ensure
proper reassembly of the filter
-
keep all operating units of AdBlue
®
dispenser clean to enable easy identification and rapid repair of
unexpected failure
-
check systematically all joints and if any leakage is identified, retighten the joint or make it tight
-
check the condition of the dispensing nozzle; either repair or replace the nozzle according to the
type and extent of the failure
-
check the door lock function, grease it occasionally
-
pay attention to the cleanness of the AdBlue
®
dispenser, especially the glass of the counter
-
discharge sediments or other contaminants from the tank (containers of AdBlue
®
) by means of
sludge pumps
13.
DISASSEMBLY AND DISPOSAL
ATTENTION!
Considering the fact that the residues of AdBlue
®
always are left in hydraulic distributing systems and
in hydraulic parts of the AdBlue
®
dispenser it is necessary to pay higher attention to the disassembly
and disposal. The dismantling must be carried out on dripping grids where the residues of AdBlue
®
are
safely removed into dripping tanks.
Hoses have to be disposed according to special regulations for the disposal of ecologically undesirable
materials.
14.
TRANSPORT
The customer shall agree to the method of AdBlue
®
dispenser transport from the manufacturer in the
contract. In case Adast Systems, a.s. provides the transport for the customer, the product will be delivered
to the agreed destination. The manufacturer possesses the necessary knowledge of handling and
Summary of Contents for AdBlue V-line 47 Series
Page 2: ......
Page 11: ...USER S MANUAL V line AdBlue 47xx xxx 7 Figure 2 ...
Page 28: ......
Page 33: ...USER S MANUAL V line AdBlue 47xx xxx Enclosure No 5 ...
