USER’S MANUAL V-line AdBlue
®
47xx.xxx
21
transportation methods. In case the customer is responsible for another method of transport, the
manufacturer shall ensure professional loading of the product but is not responsible for the transport itself.
It is generally accepted that the AdBlue
®
dispenser shall be shipped properly boxed and always fixed to
the frame. The dispenser should be protected against damage (of covering and painting), displacement
and rolling over on the means of transport. A special frame with holes for forklift is used for the of the
dispenser. All manipulation and transport have to be carried out only in vertical position - the AdBlue
®
dispenser must not be put on its covering.
ATTENTION!
Only forklifts are allowed to be used for manipulation. If other handling devices are used, Adast
Systems, a.s. does not guarantee any prospective damage!
15.
PACKING AND STORAGE
15.1.
Packing
The packing of AdBlue
®
dispensers differs in dependence on the point of destination. Dispensers for home
market are packed up in bubble wrap, while cardboard wrapping is mostly used for abroad. On preliminary
agreement of the customer the dispensers delivered abroad can be also packed up in bubble wrap or other
similar packing.
15.2.
Storage
Max. storage time under the shelter is 3 months and 1 month for outdoor storage with bubble
wrapping. Max. storage time under the shelter is 6 months with cardboard packing.
ATTENTION!
Because the hydraulic system of the dispenser may contain residual test medium (demineralised
water) must be the dispenser during periods when the ambient temperature drops below 0 ° C,
because antifreeze stored in areas where it is guaranteed that the temperature drops below 0 C.
There is a danger of damage hydraulic components of the dispenser.
16.
GUARANTEE AND CLAIMING
Reliable operation and service life of the dispenser depends on correct attendance and maintenance.
Therefore it is necessary that every employee maintaining or attending the dispenser is acquainted with all
principles of correct attendance and maintenance and related regulations for AdBlue
®
.
ATTENTION!
In particular, it is forbidden to use components during maintenance or lubrication, which could
cause deterioration of AdBlue
®
.
Defects and shortcomings owing to incorrect or careless attendance and maintenance of the dispenser and
its individual functional parts are not included in the guarantee. Therefore any complaint within this
matter would be acknowledged.
If the manufacturer carrying out guarantee repairs identifies excessive quantity of impurities in the
hydraulic system, the complaint will not be accepted and expenses will be charged to the user.
Claims will not be acknowledged due to the following reasons:
–
Use of unsuitable fluid
–
Shortcomings owing to incorrect design or imperfect assembly of "the lower process equipment", i.e.
tank location, length and diameter of piping, type and characteristics of fittings etc. – AdBlue
®
dispenser installation on the filling station must answer the given criteria from point no 15. hereof
instructions.
–
Leakage in the hydraulic system of the storage system.
–
With meters the impurities can result in function locking, excessive wear of slide valve gear, cylinders
and packing.
–
Defects owing to faulty high-power wiring at the filling station, e.g.:
-
incorrect installation of the switchboard
Summary of Contents for AdBlue V-line 47 Series
Page 2: ......
Page 11: ...USER S MANUAL V line AdBlue 47xx xxx 7 Figure 2 ...
Page 28: ......
Page 33: ...USER S MANUAL V line AdBlue 47xx xxx Enclosure No 5 ...
