5-11
Duralink64 Drivers for NetWare
5
To assign an IP protocol, follow these steps:
a
In the List of Frame Types box, select the frame type, and
press Enter.
b
In the IP Parameters box, select Enter IP Address, and press
Enter
. The IP Address box appears.
c
In the IP Address box, type the IP address number, and
press Enter.
d
In the IP Parameters box, select Enter Subnet Mask, and
press Enter.
e
In the Subnet Mask box, type the corresponding subnet
mask, and press Enter.
f
Press Esc.
g
Repeat Steps a through f for each appropriate port or pair.
h
Press Esc until you return to the List of Ports/Failover Pairs
box.
6
Repeat Steps 1 through 5 for any other Groups you wish to
configure.
7
Press Esc until you return to the Main Menu.
As an example, following are the overlapping dialog boxes viewed
while assigning the protocols in NetWare.
