4-23
Duralink64 Configurations for Windows
– To remove ports from the group, select the appropriate port
from the Group Ports box, and click Remove.
3
Repeat Step 2 for each appropriate port.
4
To save changes, click Apply.
5
When you are finished, click OK.
6
If SNMP is not set up on the computer, you will receive the
Setup Message below. Ignore the message, and click OK.
7
When adding or removing a group or port, you will receive a
message such as the ones shown below. Click OK.
This message appears when you add ports with IP addresses to
a new group.
This message appears when you add ports with IP addresses to
Group2 with an existing IP address.
8
In the Network window, click Close.
