3-9
Duralink64 Driver Installation for Windows
Installing Windows Me
For the initial installation of a DuraLAN driver on your Windows
Me platform, follow these steps:
1
Start Windows Me, and wait for the Add New Hardware
wizard to open. (If the wizard does not open, refer to
Installation Tips on page 3-10
.)
2
After the Add New Hardware wizard opens, Windows finds
the new hardware PCI Ethernet Controller.
3
For first-time installation, when in this screen, click Specify the
location of the driver (Advanced)
, and click Next. (The next
time you install a Duralink64 driver, you’ll check the
Automatic search for the best driver (Recommended)
option
(default), and click Next.)
4
Check Removable Media (Floppy, CD-ROM ... ) and Specify a
location
. Also in the text box under Specify a location, enter the
driver path—for example:
d:\me
(The CD-ROM drive letter may vary.)
5
Be sure the CD with the Duralink64 drivers is in the CD-ROM.
The default automatically selected is for Removable Media
(Floppy, CD-ROM...). Click Browse.
6
In the New Browse Folder, search for the correct directory.
Select the directory where the driver for Windows Me resides,
and click OK. (If you have more NICs to install, Windows Me
will recognize it once the first NIC has been recognized and
located.)
7
Back in the wizard, click Next.
8
In the new window, click Next again.
9
Then click Finish, and restart the system.
10
If you have more NICs to install, Windows Me will recognize
them once the first NIC has been identified and located.
When finished, continue to
Chapter 4, Duralink64 Configurations for
Windows
on
page 4-1
.