Adaptec ANA-62000, User Manual

Page: 80 / 202

7-6
DuraLAN Fast Ethernet NICs User’s Guide
Windows NT 3.51
To create Failover pairs, follow these steps:
1
From the Available Adaptec Ports box, click the port you want as the
primary port.
Figure 7-5. Configuration Tab
2
Click Add. The port is added under Primary Port in the Failover Pair
list.
3
To assign a backup to the primary port, click the appropriate port
from the Available Adaptec Ports box, and then click Add. The port
is added in the Backup Port field.
4
Click Apply.
5
O
PTIONAL
. Repeat steps 1 through 5 to create another Failover pair.
6
O
PTIONAL
. To remove a Failover pair
a
Click the port from the Primary Ports list, and then click Remove.
Both ports return to the Available Adaptec Ports box.
b
Click Apply.