Adaptec ANA-62000, User Manual

Page: 129 / 202

10-11
Duralink64 Failover for NetWare
Configuring IP
a
In the List of Frame Types box, select the frame type, and
then press
Enter
.
b
In the IP Parameters box, select
Enter IP Address
, and then
press
Enter
.
Figure 10-19. IP Parameters Box
c
In the IP Address box, type the address number, and then
press
Enter
.
Figure 10-20. IP Address Box
d
In the IP Parameters box, select
Enter Subnet Mask
, and
then press
Enter
.
e
In the Subnet Mask box, type the corresponding subnet
mask, and then press
Enter
.
Figure 10-21. Subnet Mask Box
f
Press
Esc
.
g
Repeat Steps a through f for each appropriate port or pair.
h
Press
Esc
until you return to the List of Ports/Failover Pairs
box.
4
Repeat Steps 1 through 3 for any other port or pair you wish to
configure.
5
Press
Esc
until you return to the Main Menu.
6
Continue to Viewing the Configuration.
IP Parameters
Enter IP Address
Enter Subnet Mask
IP Address
1.1.1.2
Subnet Mask
ff.ff.ff.0