Adaptec ANA-62000, User Manual

Page: 77 / 202

7-3
Duralink64 Failover for Windows NT
5
Repeat steps 1 through 4 for each existing port.
6
When you are done, click OK.
7
Continue with Creating the Failover Pair.
Creating the Failover Pair
You can create Failover pairs in the Configuration tab. A Failover
pair consists of two ports only—the primary port and the backup
port.
Windows NT 4.0
To create Failover pairs, follow these steps:
1
From the Available Adaptec Ports box, click a port to be designated
as a primary port.
Figure 7-2. Failover Configuration Tab
2
Click Add. The port is added under Primary Port in the Failover Pair
list.
3
To assign a backup to the primary port, click the appropriate port
from the Available Adaptec Ports box, and then click Add. The port
is added in the Backup Port field.