Adaptec ANA-62000, User Manual

Page: 117 / 202

9-11
Duralink64 Standard Driver for NetWare
Restarting the Server
After installing the Standard driver and configuring the ports, you
must restart the server.
1
In the Internetworking Configuration menu, press
Esc
.
2
In the Exit INETCFG box, select Yes, and then press
Enter
.
3
In the Add Initialize Commands to
autoexec.ncf
box, select Yes,
and then press
Enter
.
4
The next screen indicates that the configuration will be
activated. Press
Enter
.
5
At the server console type
down
and then press
Enter
.
6
Type
restart server
and then press
Enter
.
7
O
PTIONAL
. After the server is restarted you can review the
current settings. Type config at the console prompt, and then
press
Enter
.
Troubleshooting Tip
At system reboot, I receive a message that the NIC configuration contains
invalid settings. What should I do?
1
Follow the instructions at the server prompt.
2
Document each of your selections.
3
Return to
inetcfg
.
4
Use the Internetworking Configuring menu to access those
screens you must modify.