background image

COPYRIGHT

Copyright © 2008, Adaptec, Inc. All rights reserved worldwide.
Information in this document is subject to change without notice and does not represent a 
commitment on the part of Adaptec or any of its subsidiaries. The software described in this document 
is furnished under a license agreement. The software may be used only in accordance with the terms 
of the license agreement. It is against the law to copy the software on any medium. No part of this 
manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, 
including photocopying and recording, for any purpose without the express written permission of 
Adaptec, Inc.

TRADEMARKS

Adaptec, the Adaptec logo, Adaptec OnTarget, Storage Manager, Snap Server, the Snap Server logo, 
GuardianOS, SnapOS, and Snap Disk are trademarks or registered trademarks of Adaptec, Inc. in the 
U.S.A. and other countries.
Products mentioned herein are for identification purposes only and may be registered trademarks or 
trademarks of their respective companies. Microsoft, Windows, Windows Vista, Internet Explorer, 
and Active Directory are registered trademarks of Microsoft Corporation. Java and Solaris, are 
registered trademarks of Sun Microsystems, Inc. Netscape is a registered trademark of Netscape 
Communications Corp. AppleShare, AppleTalk, Macintosh, and MacOS are registered trademarks of 
Apple Computer. BakBone and NetVault are trademarks of BakBone Software. AIX is a registered 
trademark of IBM Corporation. OpenView and HP-UX are trademarks or registered trademarks of 
Hewlett-Packard Company. BrightStor, Unicenter TNG, ARCserve, eTrust, and Unicenter are 
trademarks or registered trademarks of Computer Associates, Inc. Smart UPS and APC are registered 
trademarks of American Power Conversion Corporation. UNIX is a registered trademark of The Open 
Group. XFS is a trademark of Silicon Graphics, Inc. Backup Exec, VERITAS NetBackup 
BusinessServer, and VERITAS NetBackup DataCenter are trademarks or registered trademarks of 
VERITAS Software Corporation. Legato NetWorker is a trademark of Legato Systems, Inc. Linux is a 
registered trademark of Linus Torvalds. SCO Open Server and UnixWare are trademarks of the SCO 
Group. StorAssure is a registered trademark of Adaptec, Inc. All other brand names or trademarks are 
the property of their respective owners.

REVISIONS

Adaptec, Inc. provides this publication “as is” without warranty of any kind, either express or 
implied, including but not limited to the implied warranties of merchantability or fitness for a 
particular purpose. Adaptec and its subsidiaries reserve the right to revise this publication and to 
make changes in the content hereof without the obligation of Adaptec to notify any person of such 
revision or changes.

Summary of Contents for 5325302053 - Snap Server 720i NAS















































































































































































































































Reviews: