manualshive.com logo in svg

Adaptec 5325302053 - Snap Server 720i NAS, User Manual

The Adaptec 5325302053 - Snap Server 720i NAS is a powerful network-attached storage device designed to efficiently store and manage vast amounts of data. Enhance your understanding of its features and functionalities by downloading the comprehensive User Manual for free from our website. Discover how to maximize the potential of this exceptional product and unlock its full capabilities.

Share
Download
background image

Chapter 7

Controlling Access to Your IP SAN

This chapter describes how to use Adaptec Storage Manager to restrict and control 

access to your IP SAN and iSCSI targets (logical devices) with auto-discovery 

control lists, authentication, and the Security Manager.

Limiting Discovery of iSCSI Targets with Discovery Control 

Lists

If you want to limit which iSCSI initiators can discover an iSCSI target (logical 

device), you can create a discovery control list which will allow one or more 

specified iSCSI initiators to discover an iSCSI target while preventing other iSCSI 

initiators from discovering it, as illustrated in this figure.

Each iSCSI target can have its own auto-discovery control list, with specified iSCSI 

initiators that are permitted to discover it. 

Note  

Discovery control lists don’t prevent iSCSI initiators from logging into iSCSI 

targets that aren’t on their control lists. If you are using iSNS to discover iSCSI 

targets and want to control which logical devices are logged into by which iSCSI 

initiators, you must set CHAP authentication. Without CHAP authentication, all 

iSCSI initiators will be able to log in to all iSCSI targets. See “Controlling Access to 

Your IP SAN with Authentication” on page 85 for more information.

iSCSI

Discovery control list

denies discovery to

Initiator B

Discovery control list allows 
Initiator A to discover target

iSCSI Initiator A

iSCSI Initiator B

iSCSI Target

Summary of Contents for 5325302053 - Snap Server 720i NAS















































































































































































































































Reviews:

No comments

Related manuals for 5325302053 - Snap Server 720i NAS

D-Link DIR-855L Quick Installation Manual preview
DIR-855L
Brand: D-Link Pages: 28
D-Link DIR-826L Quick Install Manual preview
DIR-826L
Brand: D-Link Pages: 2
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Quick Start Manual preview
DIR-655 - Xtreme N Gigabit Router Wireless
Brand: D-Link Pages: 3
D-Link DIR-605L Technical Support Setup Procedure preview
DIR-605L
Brand: D-Link Pages: 11
D-Link DIR-880L Quick Install Manual preview
DIR-880L
Brand: D-Link Pages: 12
D-Link DIR-842 Quick Install Manual preview
DIR-842
Brand: D-Link Pages: 12
D-Link DIR-821 Quick Install Manual preview
DIR-821
Brand: D-Link Pages: 24
D-Link DIR-803 Quick Installation Manual preview
DIR-803
Brand: D-Link Pages: 20
D-Link DIR-815/AC Quick Installation Manual preview
DIR-815/AC
Brand: D-Link Pages: 44
D-Link DIR-830M Quick Installation Manual preview
DIR-830M
Brand: D-Link Pages: 52
D-Link DIR-821 User Manual preview
DIR-821
Brand: D-Link Pages: 103
Kaleidescape M700 Replacement Instructions Manual preview
M700
Brand: Kaleidescape Pages: 24
IBM B50 Service Manual preview
B50
Brand: IBM Pages: 198
IBM 990 Reference Manual preview
990
Brand: IBM Pages: 88
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Brand: OCCITALINA Pages: 54
FOR-A MFR-16DTIO Installation Manual preview
MFR-16DTIO
Brand: FOR-A Pages: 2
Vxl Itona TC73yy Hardware User'S Manual preview
Itona TC73yy
Brand: Vxl Pages: 19
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Brand: Patton electronics Pages: 12

Brands by name

Popular brands

Load more brands