© Adam Equipment Company 2010
•
Press
[Tare]
to accept the value.
•
Press
[Zero]
to return to weighing.
12.2.7
F7 -SUCCESSIVE TARE
•
To enter this parameter, press the
[Tare]
key when
“F7”
is shown.
•
The display will show if the successive tare is on or off.
•
Press the
[U.Wt./Units]
key to change the value.
•
Press
[Tare]
to accept the displayed value.
•
Press
[Zero]
to return to weighing.
12.2.8
F8 –ADC COUNTS
•
To enter this parameter, press the
[Tare]
key when
“F8”
is shown.
•
This parameter allows you to view the A/D counts from the internal A/D
converter. This can be an aid to service.
•
Press the
[Tare]
key to return to the PARAMETER menu.
•
Press the
[Zero]
key to return to weighing.
•
Typical value at zero is 30,000-90,000 (approx.) Typical value at full
capacity is 500,000 (approx.)
12.2.9
F9 –PIN
This parameter allows setting of password to enter the user parameters, see section
12.1. The default value is
“0000”
.
•
To enter this parameter, press the
[Tare]
key when
“F9” “Pin” i
s shown.
•
The
“Weight”
display will show
“Pin 1”
•
Enter the new password. The
“Unit Weight”
display will show dashes.
Press
[Tare]
.
Summary of Contents for GC INDICATOR
Page 4: ...Adam Equipment Company 2010...
Page 9: ...Adam Equipment Company 2010...
Page 42: ...Adam Equipment Company 2010...
Page 45: ...Adam Equipment Company 2010...
