Adam GC INDICATOR, Manual

Page: 29 / 48

© Adam Equipment Company 2010
9.3 REAL TIME CLOCK SETUP
The Real Time Clock (RTC) is used only for the RS-232 output. The Date and Time
can be set as required. The scale will keep the clock running even when the power
is off.
Setting up the clock
•
Press and hold the [CE] key for 4 seconds, release when the date and time is
displayed. The initial displays show the current date and time set.
“ rtC “ “11,14,06” “16,41,35”
•
Press the [CE] key to change the date and time. The display will show the
current time in the format, “H-m-S”.
“timE” “H-m-S” “142929” or if no time has been set show “000000”
•
Enter the time using the numeric keys using a 24 hour clock format, 3:41PM is
“154100”.
“timE” “H-m-S” “154100”
new time overwrites the old
• Press the
[Tare]
key to accept the time. The display will show the current
date format.
“dAtE” “y-m-d”
•
Press the [ U.Wt./Unit] key to change the date format. Available formats are:
“Y-m-d” year, month, day
“m-d-Y” month, day, year
“d-m-Y”
day, month, year
• Press the [Tare] key to accept the chosen format and then enter the date in
this format.
“dAtE” “m-d-y” “051209”
note current date is in current format, will
show 000000 if no date has been set.
•
Press the [Tare] key to accept the date.