Acura 2008 MDX Owner'S Manual Download Page 353

Page: 353 / 489

Your vehicle still has normal front-

wheel drive with vehicle stability

assist (VSA), but does not have

your vehicle checked by a dealer

as soon as possible.

instrument panel stays on, and the

message also appears on the multi-

information display, there is problem

driving, it indicates the differential

temperature is too high. You will also

HIGH’’ message on the multi-

information display. If this happens,

pull to the side of the road when it is

safe, shift to Park, and let the engine

idle until the indicator goes out. If

the indicator does not go out, take

your vehicle to a dealer to have it

checked.

riv

ing

349

０７／０７／０９１０：０９：３１３１ＳＴＸ６１００３５４

Super Handling-All Wheel Drive (SH-AWD

) System

If the SH-AWD indicator blinks while

see an ‘‘SH-AWD

DIFF TEMP.

If the SH-AWD

indicator on the

‘‘CHECK SH-AWD

SYSTEM’’

with the SH-AWD

system.

the advantages of SH-AWD

. Have

Summary of Contents for 2008 MDX










































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands

Acura 2008 MDX, Owner'S Manual

Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands