Acura 2008 MDX Owner'S Manual Download Page 268

Page: 268 / 489

There are various types of DVDs

available. Some of them are not

compatible with your system.

The DVD player in your rear

entertainment system can play

DVDs and CDs bearing the above

marks on their packages or jackets.

The tips on how to handle and

protect DVDs are basically the same

as those for compact discs. Refer to

‘‘Protecting Your CDs’’ on page

Those packages or jackets should

also bear the designation of ‘‘1’’ or

‘‘ALL’’. DVD-ROMs cannot be played

in this system.

The DVD player can also play discs

recorded in MP3/WMA formats and

DTS CDs.

This product incorporates copyright

protection technology that is

protected by U.S. patents and other

intellectual property rights.

Use of this copyright protection

technology must be authorized by

Macrovision, and is intended for

home and other limited viewing uses

only unless otherwise authorized by

Macrovision.

Reverse engineering or disassembly

is prohibited.

229

Playable DVDs

Protecting DVDs

Rear Entertainment System

264

０７／０７／０９０９：５７：３１３１ＳＴＸ６１００２６９

Summary of Contents for 2008 MDX










































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands

Acura 2008 MDX, Owner'S Manual

Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands