Acura 2008 MDX Owner'S Manual Download Page 152

Page: 152 / 489

The outer second row seat cushions

and seat-backs are equipped with

seat heaters. Turning the switch on

the driver side warms the outer seat

behind the driver’s seat only. The

passenger side switch warms the

outer seat behind the front

passenger seat.

Both front seats are equipped with

seat heaters. Because of the sensors

for the side airbag cutoff system,

there is no heater in the passenger’s

seat-back. The ignition switch must

be in the ON (II) position to use the

heaters.

Push the front of the switch, HI, to

rapidly heat up the seat. After the

seat reaches a comfortable

temperature, select LO by pushing

the back of the switch. This will keep

the seat warm.

U.S. Entertainment Packages and

Canadian models

Seat Heaters

148

LOW

Front seat

Second row seat

HEATERS

Passenger’s
Seat

Driver’s
Seat

０７／０７／０９０９：４１：３０３１ＳＴＸ６１００１５３

Summary of Contents for 2008 MDX










































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands

Acura 2008 MDX, Owner'S Manual

Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands