Acura 2008 MDX Owner'S Manual Download Page 401

Page: 401 / 489

Make sure the engine and radiator

are cool.

The coolant level should be up to

the base of the filler neck. Add

coolant if it is low.

Pour the coolant slowly and

carefully so you do not spill any.

Clean up any spill immediately; it

could damage components in the

engine compartment.

Put the radiator cap back on, and

tighten it fully.

Relieve any pressure in the cooling

system by turning the radiator cap

counterclockwise, without

pressing down.

Remove the radiator cap cover.

Remove the radiator cap by

pushing down and turning

counterclockwise.

CONTINUED

Engine Coolant

Ma
int
ena

nce

397

RADIATOR CAP COVER

RADIATOR CAP

０７／０７／０９１０：１６：０８３１ＳＴＸ６１００４０２

Summary of Contents for 2008 MDX










































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands

Acura 2008 MDX, Owner'S Manual

Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands