Acura 2008 MDX Owner'S Manual Download Page 331

Page: 331 / 489

−

Fuel economy is not a fixed number.

It varies based on driving conditions,

driving habits and vehicle condition.

Therefore, it is not possible for one

set of estimates to predict fuel

economy precisely for all drivers in

all environments.

Provides an estimated annual fuel

cost, based on 15,000 miles (20,000

km) per year multiplied by the cost

per gallon (based on EPA fuel cost

data) divided by the combined fuel

economy.

For more information on fuel

economy ratings and factors that

affect fuel economy, visit

(Canada: Visit

)

Represents urban

driving in a vehicle in light traffic. A

range of miles per gallon achieved is

also provided.

The EPA fuel economy estimates

shown in the example to the right

are a useful tool for comparison

when buying a vehicle. EPA

estimates include:

Represents a combination of city and

highway driving. The scale

represents the range of combined

fuel economy for other vehicles in

the class.

Represents a

mixture of rural and interstate

driving, in a warmed-up vehicle,

typical of longer trips in free-flowing

traffic. A range of miles per gallon

achieved is also provided.

www.

fueleconomy.gov

www.

vehicles.gc.ca

Actual Mileage and EPA Fuel

Economy Estimates Comparison.

Estimated Annual Fuel Cost

City MPG

Combined Fuel Economy

Highway MPG

Fuel Economy

riv

ing

327

Combined Fuel
Economy

(Sample U.S. EPA label shown)

Estimated Annual
Fuel Cost

City MPG

Highway MPG

０７／０７／０９１０：０６：２５３１ＳＴＸ６１００３３２

Summary of Contents for 2008 MDX










































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands

Acura 2008 MDX, Owner'S Manual

Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands