Acura 2008 MDX Owner'S Manual Download Page 327

Page: 327 / 489

CONTINUED

Park with the driver’s side closest

to the service station pump.

Open the fuel fill door by pressing

the button in the driver’s door. (To

open the fuel fill door manually,

see page

Remove the fuel fill cap slowly.

You may hear a hissing sound as

pressure inside the tank escapes.

Place the cap in the holder on the

fuel fill door.

Stop filling the tank after the fuel

nozzle automatically clicks off. Do

not try to ‘‘top off’’ the tank. Leave

some room for the fuel to expand

with temperature changes.

even

though the tank is not full, there may

be a problem with your vehicle’s fuel

vapor recovery system. The system

helps keep fuel vapor from going

into the atmosphere. Try filling at

another pump. If this does not fix the

problem, consult your dealer.

446

If the fuel nozzle keeps clicking off

Refueling

Service Station Procedures

riv

ing

323

Push

TETHER

HOLDER

FUEL FILL CAP

Gasoline is highly flammable
and explosive. You can be
burned or seriously injured
when handling fuel.

Stop the engine, and keep
heat, sparks, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.

０７／０７／０９１０：０５：５０３１ＳＴＸ６１００３２８

Summary of Contents for 2008 MDX










































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands

Acura 2008 MDX, Owner'S Manual

Search results

Summary of Contents for 2008 MDX

Reviews:

Related manuals for 2008 MDX

Brands by name

Popular brands