49
3. CONTROL FUNCTION:
DESCRIPTION
CONTROL PANEL
1
2
3
4
7
8
9
10
1. AC receptacle
2. AC circuit breaker
3. Multimeter
4. 3 in 1 switch knob
5. DC protector
6. DC receptacle
7. Electric Start
8. ESC(engine smart
control)
9. Parallel receptacle
10. Ground terminal
230V
1. Fuel tank cap
2. Handle
3. Control panel
4. Inverter parts
5. Battery
6. Brake
7. Recoil starter grip
8. Shutter
9. Muffler
10. Oil drain bolt
11. Oil filler cap
12. Air cleaner
13. Carburetor
14. Spark plug
15. Left cover
16. Oil check window
3
1
2
4
5
6
7
8
9
10 11
13
14
12
15
16
5
6
Serial number
T***YYMM*******
The YYMM is year
and month of
manufacturing.
3. CONTROL FUNCTION:
CONTROL FUNCTION
Engine/fuel valve “OFF”; ignition circuit is
switched off. Fuel is switched off.
The engine will not run.
Engine switch \fuel valve \choke.
“ON” Ignition circuit is switched on.
Fuel is switched on. Choke is switched on.
The engine can be running.
Engine switch \fuel valve \choke.
“ON” Ignition circuit is switched on.
Fuel is switched on. Choke is switched on.
The engine can be start.
Tip:
The choke is not required to start
a warm engine.
“ON”
When the ESC switch is turned to “ON”,
the economy control unit controls the
engine speed according to the connected
load. The results are better fuel consumption
and less noise.
“OFF”
When the ESC switch is turned to “OFF”,
the engine runs at the rated (3100 rpm).
Regard-less of whether is a load connected
or not.
Tip:
The ESC must be turned to“OFF” when
using electric devices that require a large
starting current, such as a compressor or
a submergible pump.
3 in 1 switch knob.
Engine smart control.