ACTA
tek
Pte Limited
ACTAtek3 Manual
64
8.3.1.4.
To Add a New Access Right
Click on “Add Access Right”. Select which terminal this access right is for and whether
Quick Access (Smart Card Access) is enabled or disabled for it. Click on “Set Terminal” for
proceed, as shown in the following page.
On the next page select the days applicable for “Day”. Check “Always” will apply to all days.
Then select the “From” and “To” time this access right is either enabled or disabled.
(Disabled access means nobody is allowed access to the unit from the relevant access
group. Each user is assigned an access group when they are added into the system.)
Once the timings are assigned, select whether the access is enabled / disabled in that period,
and select “Set Time” to confirm.
