ACTAtek ACTAtek3 ACTA3-1k-FAM-SM-C, Manual

Page: 39 / 82

ACTA tek Pte Limited
ACTAtek3 Manual 39
6.7.5. DHCP IP Configuration
DHCP Configuration allows for IP Addresses to be dynamically assigned, and match with that
of the corporate LAN settings. With this option, the IP Settings do not have to be statically
assigned and the process can be simplified. Below are the steps for enabling or disabling the
settings.
6.7.5.1. To Enable DHCP:

Select the icon on the bottom left of the screen, which is for IP Settings.

Use the ‘Previous / Next’ button until the “DHCP” option is highlighted.

Press ‘Enter/Return’.

The Current status of the DHCP will be displayed, if it is “DHCP (OFF)”, it will be enabled.

If successful, a “DHCP Enabled” message will be displayed and the green LED will be
blinking.

Press ‘Enter/Return’ to modify other settings in the IP Settings option, or Press the ‘Menu’
button to go back to the Administrator Menu Screen, or hit ‘Back’ twice to exit from the
system.
6.7.5.2. To Disable DHCP:

Select the icon on the bottom left of the screen, which is for IP Settings.

Use the ‘Previous / Next’ button until the “DHCP” option is highlighted.

Press ‘Enter/Return’.

The Current status of the DHCP will be displayed, if it is “DHCP (ON)”, it will be disabled.

If successful, a “DHCP Disabled” message will be displayed and the green LED will be
blinking.

Press ‘Enter/Return’ to modify other settings in the IP Settings option, or Press the ‘Menu’
button to go back to the Administrator Menu Screen, or hit ‘Back’ twice to exit from the
system.
IP S etting
DHCP (OFF)
S ubnet Mask
IP Address
Gateway
DNS IP
IP S etting
DHCP (OFF)
S ubnet Mask
IP Address
Gateway
DNS IP
IP S etting
DHCP (ON)
S ubnet Mask
IP Address
Gateway
DNS IP
IP S etting
DHCP (ON)
S ubnet Mask
IP Address
Gateway
DNS IP
OK
DHCP E nabled
√
OK
DHCP Disabled
√