ACTA
tek
Pte Limited
ACTAtek3 Manual
18
4.5.
Fingerprint Enrollment:
Step 1: Place the center of any one finger directly above the sensor right in the center, as
shown below:
Step 2: Place the center of the same finger (enrolled in Step 1), slightly aligned to the left.
Step 3: Place the center of the same finger, slightly aligned to the right.
After each placement, wait for the message “Template Stored” on the LCD screen to appear,
and then remove your finger and press “Enter/Return” to enroll the second or third finger(s).
If you have any questions regarding the enrollment procedure, e-mail us at
[email protected] .
