194
After clicking on
OK
, you should see the green borders on the
Virtual Mat
, indicating how the printout will
be placed on the mat and where the arrow will be printed. If the arrow is outside the green borders, move it
so that it falls within the boundaries:
Go to
File>Print Preview
and you will be able to see the arrow plus the four registration marks which
should be aligned with the boundaries of the arrow:
Always make sure you can see those registration marks before continuing since they are an integral part of
the PNC process. If your print preview matches the one above and you see the four marks, click on the
Information about your
current printer settings are
shown here.
Green dashed lines
indicate the part of the
screen that will be printed.
Click here to print.
Check this preview carefully.
Do you see all four
registration marks? (red
arrows point out the 4 reg
marks)
Will you be getting what you
need printed?
(Note that the Wireframe
option was turned off for this
screen shot so that the
image could more clearly be
seen in this tutorial).
Click on
OK
when done
Check this option if you want
an outline only of the arrow
printed (to save on ink!)
Check these three options
Option to change color of the image outline
Set to 0 as this does not apply
to the
ACS-24UHF
.
Summary of Contents for ACS-24UHF/Eagle
Page 20: ...20...
